Silicone numeric keypad embossing button keypad

An embossing button keypad can incorporate raised identification into a custom silicone numeric layout. The relief should be developed with the face size and normal pressing area. Clear numbers need to remain useful without unintentionally changing where the finger first contacts each button.

Check the legend size and position on the actual molded surface. A small curved face may need a different arrangement from a broad flat key. The key spacing and supporting rubber should still make movement between numbers straightforward.

Evaluate the completed keypad inside its housing for readability, travel, and return. During fitting, keep the base flat and correctly located, with no edge trapped beneath the enclosure. Select the formulation for the use and cleaning environment. Care should include the recesses around raised details where residue can remain. If the keypad is removed during servicing, preserve its orientation and check the full numeric sequence after restoring the original supporting arrangement.

Material options

Silicone. Custom formulation and color for the intended contact conditions.

Hardness selection

Silicone: 20–80 Shore A. Evaluate the completed keypad inside its housing for readability, travel, and return.

Custom dimensions

Check the legend size and position on the actual molded surface.

Fit & assembly

The key spacing and supporting rubber should still make movement between numbers straightforward.

Use & inspection

If the keypad is removed during servicing, preserve its orientation and check the full numeric sequence after restoring the original supporting arrangement.

Photos illustrate structure or material only. Clear numbers need to remain useful without unintentionally changing where the finger first contacts each button. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.