rubber switches push button custom made silicone keypads

A rubber push button provides a custom molded operating surface within a silicone keypad. The visible cap should fit the housing and align with the switch beneath. Function identification can be printed, embossed, debossed, or color-filled according to the available face area.

Check the installed view before finalizing the legend. The housing may cover the surrounding membrane and reduce the area visible to the user. Leave enough clearance around the moving cap so it does not rub against the aperture during a press.

Fit the keypad cleanly and inspect its stationary edges before closing the enclosure. Test the controls with the case secured, including presses from the normal finger angle and near adjacent keys. The complete switch and housing arrangement determines the final movement and actuation requirements. Select the compound and marking method for the actual environment and cleaning routine. During care, remove residue gently without scraping the legends or forcing dirt beneath the key boundaries, and recheck seating after any panel service.

Material options

Silicone. Custom formulation and color for the intended contact conditions.

Hardness selection

Silicone: 20–80 Shore A. Leave enough clearance around the moving cap so it does not rub against the aperture during a press.

Custom dimensions

Test the controls with the case secured, including presses from the normal finger angle and near adjacent keys.

Fit & assembly

The visible cap should fit the housing and align with the switch beneath.

Use & inspection

During care, remove residue gently without scraping the legends or forcing dirt beneath the key boundaries, and recheck seating after any panel service.

Photos illustrate structure or material only. A rubber switches push button component provides a custom molded operating surface within a silicone keypad. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.