Silicone bicycle handle NBR EPDM Colorful Grip

A Silicone bicycle handle grip should fit the intended bar and remain clear of adjacent controls and end features. The added diameter and length need to suit the hand space available on the complete bicycle assembly.

NBR and EPDM are alternative constructions to evaluate for the intended use conditions. ETOL offers custom sizes, hardness, colors and molded identification. Compare the actual bar surface and retention arrangement before selecting the inner profile.

Fit the grip through the bicycle design's intended assembly method and check the movement of nearby controls. The cover should not migrate into their operating space or rotate unexpectedly during normal handling. Evaluate the completed handle arrangement before use. During cleaning, use compatible methods and inspect for splits or loose engagement at the ends. If a control is repositioned or the bar is replaced, review the grip's fit and clearance again. Replace a damaged component and correct its retention rather than using greater hand pressure to keep a loose sleeve from turning.

Material options

Custom silicone or EPDM or NBR formulation; tailor the geometry and color to the required interface and exposure.

Hardness range

20–80 Shore A for silicone. Assess the grade against this fit requirement: Fit the grip through the bicycle design's intended assembly method and check the movement of nearby controls.

Custom profile & fit

Compare the actual bar surface and retention arrangement before selecting the inner profile.

Assembly considerations

The added diameter and length need to suit the hand space available on the complete bicycle assembly.

Design check

NBR and EPDM are alternative constructions to evaluate for the intended use conditions.

Photos illustrate structure or material only. The added diameter and length need to suit the hand space available on the complete bicycle assembly. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.