Custom walker tips walking stick crutch rubber feet

Custom walker tips are molded end components developed around the lower legs of a compatible walking aid. Unlike a single loose cap, a set of tips must be considered together with the frame: their installed heights and seating positions affect how the aid meets the ground. The related walking stick and crutch applications named in this listing also require their own mating dimensions and equipment-specific approval.

For a walker project, document each leg connection and identify whether all positions use the same part. Measure the tube profile, insertion depth and the angle at which the leg normally approaches the surface. If the frame uses more than one tip design, label the positions on the assembly drawing. This avoids ordering visually similar parts that create different installed heights or do not seat correctly on their assigned legs.

Material, hardness, shape and color can be discussed with ETOL as part of custom molding. Supply the original equipment requirements and the inspection criteria used for the completed aid. Do not assume that an available rubber formulation establishes a load rating or that one tip can be substituted across unrelated mobility products. A fitted sample provides a better reference than matching the outer diameter of an existing worn part.

During maintenance, inspect custom walker tips for uneven wear across the set, a loose cavity or damage at the floor contact area. Follow the walking aid manufacturer's replacement guidance and examine the underlying leg if one position wears differently from the others. Remove trapped debris before refitting a serviceable part, and keep the assembly free from unintended height differences. For a quotation, provide a labeled frame diagram, the required quantity per assembly and the relevant leg drawings. These details allow the component specification to reflect how all of the contact points work together in the finished product.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: Do not assume that an available rubber formulation establishes a load rating or that one tip can be substituted across unrelated mobility products.

Custom profile & fit

Measure the tube profile, insertion depth and the angle at which the leg normally approaches the surface.

Assembly considerations

Unlike a single loose cap, a set of tips must be considered together with the frame: their installed heights and seating positions affect how the aid meets the ground.

Design check

Supply the original equipment requirements and the inspection criteria used for the completed aid.

Photos illustrate structure or material only. Unlike a single loose cap, a set of tips must be considered together with the frame: their installed heights and seating positions affect how the aid meets the ground. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.