Custom tubing rubber tips rubber plug stopper tips for steel pipe

Rubber pipe tips fit steel tube ends with a molded component developed around the tube geometry. The end finish matters: a sharp cut, projecting seam or rough coating can damage the rubber during insertion and leave the defect hidden once the tip is seated.

Compare the tube's internal and external dimensions with the intended fitting method. A plug engaging the bore and a cover engaging the outside require different measurements. The depth should also suit the available straight section near the end, without interfering with a weld or adjacent feature.

Material, hardness and color can be customized for the contact and handling conditions. Prepare the tube end before fitting the tip and check that it reaches the designed seat evenly. If the part serves as a contact foot, evaluate it with the assembled item resting in its normal position. During replacement, inspect the retained section for cuts and examine the tube end again so an unfinished edge does not damage the next tip.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Compare firmness under load at the intended contact face. A plug engaging the bore and a cover engaging the outside require different measurements.

Custom profile & fit

Compare the tube's internal and external dimensions with the intended fitting method.

Assembly considerations

Prepare the tube end before fitting the tip and check that it reaches the designed seat evenly.

Design check

If the part serves as a contact foot, evaluate it with the assembled item resting in its normal position.

Photos illustrate structure or material only. A plug engaging the bore and a cover engaging the outside require different measurements. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.