Black fairlead PVC EPDM Rubber cable wall grommet

A black cable wall grommet provides a defined, cushioned entry where a cable crosses a wall opening. Its fairlead role is easiest to achieve when the visible cable route approaches the bore naturally, without an abrupt sideways pull immediately at the wall.

Check the location of the next cable support before selecting the entry position. A support placed too far to one side can lift the rubber at the opposite edge. Match the mounting section to the surface that actually retains it, including any trim plate used around the hole.

PVC and EPDM appear among the product's material choices, and ETOL can adapt shape, dimensions, hardness and color. Keep the cable covering intact during threading and remove wall debris from the opening beforehand. Once the cable is secured, inspect the flange from the room side and behind the wall where accessible. The entry should remain seated without depending on tension in the lead. Recheck it if the cable route is later changed or a nearby fixing is moved.

Material options

Custom EPDM formulation; tailor the geometry and color to the required interface and exposure.

Hardness range

30–90 Shore A for rubber. Balance insertion flexibility with support around the opening. Match the mounting section to the surface that actually retains it, including any trim plate used around the hole.

Custom profile & fit

Check the location of the next cable support before selecting the entry position.

Assembly considerations

The entry should remain seated without depending on tension in the lead.

Design check

Once the cable is secured, inspect the flange from the room side and behind the wall where accessible.

Photos illustrate structure or material only. The fairlead role is easiest to achieve when the visible cable route approaches the bore naturally, without an abrupt sideways pull immediately at the wall. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.