OEM rubber furniture crutch chair leg tips

Custom rubber furniture crutch chair leg tips provide an end fitting for a leg or tube. The internal cavity holds the mating member, and the base supplies the rubber contact surface. Dimensions, compound and hardness can be developed for the particular furniture or crutch design.

The intended use determines more than the tube size. A chair leg can remain at a fixed angle, whereas a crutch tip meets the ground through changing positions during use. Each design therefore needs its own contact geometry and retention assessment. An end fitting that fits a tube should not be assumed suitable for another product carrying a person.

Check the support member for sharp edges before fitting. The tube end should sit where the tip is designed to support it, with sufficient material beneath the contact point. Inspect the finished assembly through its intended positions to identify edge loading, looseness or interference. Keep the ground contact area clear of embedded grit and replace worn components using the required configuration. A rubber tip alone does not define the load capacity or stability of the complete product.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: A rubber tip alone does not define the load capacity or stability of the complete product.

Custom profile & fit

Dimensions, compound and hardness can be developed for the particular furniture or crutch design.

Assembly considerations

Inspect the finished assembly through its intended positions to identify edge loading, looseness or interference.

Design check

Each design therefore needs its own contact geometry and retention assessment.

Photos illustrate structure or material only. The tube end should sit where the tip is designed to support it, with sufficient material beneath the contact point. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.