Custom made black round adjustable rubber feet

Adjustable rubber feet with a round black contact profile can be developed around a custom support arrangement. The round base defines a footprint at the floor, while the associated leveling hardware controls position. The adjustment mechanism and any permitted angular movement should be confirmed on the assembly drawing; a circular pad does not by itself indicate that the foot can swivel or self-align.

Review the support at the highest and lowest intended settings. Check the clearance around the pad and the position of the connected stem or retaining feature. If the assembly allows an angle between the leg and contact face, show the permitted movement and how the rubber is retained throughout it. If the face remains fixed, evaluate its contact with the floor at the normal installed orientation.

For the black finish, define the visible surface and any color or texture reference that needs to match surrounding hardware. ETOL can discuss custom dimensions, compound and hardness together with those appearance details. The rubber component should be sampled with the proposed leveling parts rather than approved against a generic stud. Confirm which hardware belongs to the requested supply before finalizing the specification.

During installation of adjustable rubber feet, establish the required equipment position using the hardware's specified procedure. Verify that the round contact base remains seated and that normal adjustment does not pull it out of its retaining feature. Check access to any locking component after the support is loaded. Clean the base when moving the assembly and inspect for contact concentrated along one edge. An inquiry that includes drawings at both adjustment limits will make the available space and retention requirements clearer than a single photograph taken at a convenient mid-height setting.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: Check access to any locking component after the support is loaded.

Custom profile & fit

Check the clearance around the pad and the position of the connected stem or retaining feature.

Assembly considerations

If the face remains fixed, evaluate its contact with the floor at the normal installed orientation.

Design check

Review the support at the highest and lowest intended settings.

Photos illustrate structure or material only. If the assembly allows an angle between the leg and contact face, show the permitted movement and how the rubber is retained throughout it. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.