Conductive small silicone single buttons/colorful keypads

Small silicone single buttons should match the operating mechanism and opening of the device they serve. The conductive region needs to remain aligned beneath the custom face, while the supporting base holds its intended position. Compact geometry makes side clearance and accurate seating useful to inspect before the case closes.

Check the resting position and the movement through a press. The housing should not preload the control, and an angled touch should not trap the face against an edge. Color and identification can be selected for the finished visual design once the mechanical relationship is established.

Fit with clean contact surfaces and engage the locating features without stretching the rubber. Evaluate operation after the enclosure is fastened, including release from a longer hold. During care, use the device's intended cleaning method and inspect the flexible region if the part is removed. Replace with the matching base and contact arrangement rather than another small button selected only for a similar face size or color.

Material options

Silicone. Custom formulation and color for the intended contact conditions.

Hardness selection

Silicone: 20–80 Shore A. Check the resting position and the movement through a press.

Custom dimensions

The conductive region needs to remain aligned beneath the custom face, while the supporting base holds its intended position.

Fit & assembly

Compact geometry makes side clearance and accurate seating useful to inspect before the case closes.

Use & inspection

During care, use the device's intended cleaning method and inspect the flexible region if the part is removed.

Photos illustrate structure or material only. The housing should not preload the control, and an angled touch should not trap the face against an edge. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.