Custom molded high quality silicone keypads for remote control

Silicone keypads for remote control interfaces can be molded to suit a particular housing and function layout. The flexible sheet positions multiple keys as a coordinated component, with dimensions and color adapted to the device. The arrangement should work with how the remote is held during normal use.

Consider the reach between the most frequently used controls. A thumb should be able to find the intended key without pressing its neighbor or shifting the grip unnecessarily. The visible spacing must also agree with the circuit positions beneath the keypad and the apertures in the case.

Check the assembled remote rather than judging only a loose keypad. Case clamping can change the available movement if a membrane edge is trapped or a key rubs against an opening. Test the controls from the normal holding position and confirm they return freely. Keep the underside clean during installation. Surface care should remove dirt around the keys without pushing particles into the housing or abrading any function markings used in the finished interface.

Material options

Silicone. Custom formulation and color for the intended contact conditions.

Hardness selection

Silicone: 20–80 Shore A. Case clamping can change the available movement if a membrane edge is trapped or a key rubs against an opening.

Custom dimensions

The visible spacing must also agree with the circuit positions beneath the keypad and the apertures in the case.

Fit & assembly

Check the assembled remote rather than judging only a loose keypad.

Use & inspection

Surface care should remove dirt around the keys without pushing particles into the housing or abrading any function markings used in the finished interface.

Photos illustrate structure or material only. Case clamping can change the available movement if a membrane edge is trapped or a key rubs against an opening. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.