Custom Rubber Crutch Tips Durable and Protective

Custom Rubber Crutch Tips form the contact component at the lower end of a crutch shaft. The internal socket, seating depth and base geometry need to work with that shaft as a complete assembly. A tip that looks similar from the outside can still be unsuitable if its bore does not retain the shaft correctly.

ETOL offers custom dimensions, rubber materials, hardness and colors. For replacement or product development, compare the finished shaft end with the intended socket, including any internal feature that controls insertion. Keep the end free of burrs and residue so it seats without cutting the rubber or stopping short.

The base should meet the supporting surface as intended when the assembled crutch is in its normal position. Evaluate the complete crutch with the selected tip; appearance and rubber firmness alone do not establish support capacity or traction on a particular floor. Use the replacement configuration appropriate to the crutch design.

Before use, inspect for incomplete seating, a split sidewall or wear through the contact face. Remove grit that could remain trapped beneath the tip, and replace a damaged component rather than turning the damaged area away from view. A tip that loosens or changes shape needs attention before the crutch is used again.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: Evaluate the complete crutch with the selected tip; appearance and rubber firmness alone do not establish support capacity or traction on a particular floor.

Custom profile & fit

The internal socket, seating depth and base geometry need to work with that shaft as a complete assembly.

Assembly considerations

The base should meet the supporting surface as intended when the assembled crutch is in its normal position.

Design check

For replacement or product development, compare the finished shaft end with the intended socket, including any internal feature that controls insertion.

Photos illustrate structure or material only. A tip that looks similar from the outside can still be unsuitable if its bore does not retain the shaft correctly. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.