Double sided suction dot pads silicone vacuum suction cup

Double sided suction dot pads create contact on opposite sides of a silicone component. They can be customized in size and color for an arrangement where two suitable surfaces need a removable connection. Each side must have a usable contact area; secure contact on one face cannot compensate for an unsuitable surface on the other.

Check the pad between the actual items. Surface curvature, texture and spacing affect how the individual suction regions meet their counterparts. Avoid positioning a contact area across an edge or gap. Consider how the joined pieces will be handled, especially any tendency to slide or peel one face away.

Keep both sides clean before fitting so debris is not trapped between the pad and either item. Separation should be controlled at the contact interface instead of pulling the silicone into excessive stretch. Inspect the dot surfaces for damage before reuse, and store the pad where grit will not collect on an exposed face. Evaluate holding in the intended orientation and conditions rather than assuming both sides perform identically in every arrangement.

Material options

Custom silicone compound; formulation and geometry developed together.

Hardness selection

Silicone options: 20–80 Shore A. Separation should be controlled at the contact interface instead of pulling the silicone into excessive stretch.

Custom geometry

Avoid positioning a contact area across an edge or gap.

Fit evaluation

Evaluate holding in the intended orientation and conditions rather than assuming both sides perform identically in every arrangement.

Color & OEM

Custom colors; OEM markings outside the suction contact face.

Photos illustrate structure or material appearance only. Each side must have a usable contact area; secure contact on one face cannot compensate for an unsuitable surface on the other. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.