Molded small silicone single buttons with embossed logo

Small silicone single buttons with an embossed logo incorporate the identifying detail into the molded surface. The raised feature should be developed around the limited key area so it remains recognizable without interfering with comfortable finger contact or movement beside the enclosure.

Define the button size, logo position and locating geometry together. Evaluate a molded sample from the normal operating angle and by touch where relevant to the interface design. A raised symbol can change the feel of a small key, so its height and placement should be assessed on the finished component.

Check the button with the selected contact arrangement after the panel is assembled. The embossed feature does not establish a particular actuation force or electrical response. During cleaning, use a compatible method that clears residue around the raised detail without damaging the rubber. If the key is replaced, retain the correct symbol orientation and underside geometry so the identification continues to match the function beneath it.

Material options

Silicone. Custom formulation and color for the intended contact conditions.

Hardness selection

Silicone: 20–80 Shore A. The embossed feature does not establish a particular actuation force or electrical response.

Custom dimensions

Define the button size, logo position and locating geometry together.

Fit & assembly

Check the button with the selected contact arrangement after the panel is assembled.

Use & inspection

During cleaning, use a compatible method that clears residue around the raised detail without damaging the rubber.

Photos illustrate structure or material only. The raised feature should be developed around the limited key area so it remains recognizable without interfering with comfortable finger contact or movement beside the enclosure. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.