Molded umbrella rubber tips small rubber tips

Molded umbrella rubber tips provide a flexible end covering for the mating umbrella component. The intended location determines the needed socket shape and retention: the tip should stay fitted without obstructing any nearby folding or closing movement.

ETOL offers custom dimensions, materials, hardness, colors and identification. Define the covered end and its engagement length; a shallow fit can loosen, while excess length may obstruct an adjacent part.

Fit the tip on a clean end with no burrs that could split the rubber from inside. Operate the umbrella carefully through its normal opening and closing motion to confirm that the cover does not catch or rub. Inspect small tips when cleaning or storing the umbrella, since a loosened piece can be overlooked until it is missing. Do not pull the umbrella mechanism by its protective tip; handle the appropriate rigid parts so the cover is not used as an unintended grip.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: The intended location determines the needed socket shape and retention: the tip should stay fitted without obstructing any nearby folding or closing movement.

Custom profile & fit

Define the covered end and its engagement length; a shallow fit can loosen, while excess length may obstruct an adjacent part.

Assembly considerations

Fit the tip on a clean end with no burrs that could split the rubber from inside.

Design check

Inspect small tips when cleaning or storing the umbrella, since a loosened piece can be overlooked until it is missing.

Photos illustrate structure or material only. The intended location determines the needed socket shape and retention: the tip should stay fitted without obstructing any nearby folding or closing movement. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.