Custom manufacturing example · Walking stick rubber tips/ Rubber crutch tips

CUSTOM RUBBER & SILICONE MANUFACTURING

Walking stick rubber tips/ Rubber crutch tips

A custom component for your assembly.

Define the mating surfaces, dimensions and working conditions. ETOL manufactures the part to the agreed design and material.

Factory direct
Made to order
Drawing & sample support

Share the part, its application and your estimated quantity.

Customize the fit, material and finish

Vulcanization workshop illustration with green molding presses and blue collection bins

Material & hardness

Selected for the contact, temperature and movement

Color & finish

Define the visible surfaces and intended color

Shape & dimensions

Develop holes, lips and walls around the mating parts

Mounting & fit

Match the attachment and installation method

Product Overview

Walking stick rubber tips need inspection on their ground-contacting faces as well as around the shaft entrance. A tip can remain attached while its underside becomes worn, uneven, or embedded with debris. The visible sidewall is not a complete indication of its condition.

Use the replacement configuration appropriate to the walking-stick design and its established care process. The base profile should preserve the intended contact rather than introduce a different shape or height. A worn-through area or damaged edge should be addressed before the stick is relied on for support; added pressure cannot restore missing or torn rubber.

During routine care, remove trapped material and look for wear concentrated at one part of the base. Repeated uneven wear warrants attention to the tip's fit and the complete stick rather than replacement based only on its outside diameter. Check the socket for loosening as a separate interface. After any permitted removal for cleaning, restore the intended seating and confirm that the replacement or refitted part remains compatible with the shaft and support arrangement.

Material options: Custom rubber compound and color, selected for the contact conditions and required geometry.
Hardness range: 30–90 Shore A for rubber. Assess the grade against this fit requirement: A worn-through area or damaged edge should be addressed before the stick is relied on for support; added pressure cannot restore missing or torn rubber.
Custom profile & fit: The base profile should preserve the intended contact rather than introduce a different shape or height.
Assembly considerations: Repeated uneven wear warrants attention to the tip's fit and the complete stick rather than replacement based only on its outside diameter.
Design check: Check the socket for loosening as a separate interface.

Photos illustrate structure or material only. The base profile should preserve the intended contact rather than introduce a different shape or height. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.

Choosing a material or hardness? Explore the selection guide →

From part requirements to production

Define the part

Identify key dimensions, mating surfaces and quantity

Review material & tooling

Agree the compound and manufacturing approach

Evaluate the sample

Review the fit and agreed requirements in the assembly

Produce & inspect

Manufacture and check against the approved requirements

Review the intended assembly

Working conditions

Identify temperature, contact fluids and repeated movement.

Material and structure

Consider hardness together with wall thickness and support.

Installation

Check access, mating dimensions and the fitting sequence.

Ordering this custom component

Can the shape be adjusted to my mating parts?

Yes. Show the receiving opening, contact surfaces and clearance limits. We can review the dimensions and retaining features around the intended fit.

Which details should be agreed before tooling?

Agree the critical dimensions, material, hardness, visible surfaces and sample requirements. Explain how the part is installed and which interfaces control its function.

Can a sample help define the replacement?

A sample can help explain the structure. Compare it with the assembly because wear, swelling or compression may have changed its original dimensions.

How is the quotation for this part determined?

The material, part geometry, tooling, quantity and finishing affect the quotation. Include the intended batch size and delivery destination when describing your requirements.

DISCUSS THIS COMPONENT

Describe the part you need.

Share the fit, operating conditions and quantity with our manufacturing team.