Factory custom made molded rubber tip foot chair

A custom rubber tip foot should reach its intended position on the chair leg before the chair is put back into use. The internal profile, depth, and base shape can be molded around the actual support. An apparently covered leg end may still have a tip that is only partly fitted.

Check for obstructions inside the tip and on the leg end. Debris, seams, or a damaged edge can prevent full engagement. The base should carry contact as intended rather than being loaded locally from an internal projection.

After fitting, compare the support heights and place the chair on its normal surface. Look for rocking or a tip resting unevenly. Select the compound for the floor and cleaning environment, and keep particles from collecting under the rubber during care. Inspect the retained region if the chair is moved frequently. Replace a damaged or loose tip with the matching profile rather than driving it farther onto an incompatible leg or packing the inside to force retention.

Material options

Custom rubber compound and color, selected for the contact conditions and required geometry.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: The base should carry contact as intended rather than being loaded locally from an internal projection.

Custom profile & fit

The internal profile, depth, and base shape can be molded around the actual support.

Assembly considerations

An apparently covered leg end may still have a tip that is only partly fitted.

Design check

Check for obstructions inside the tip and on the leg end.

Photos illustrate structure or material only. The internal profile, depth, and base shape can be molded around the actual support. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.