Custom made various rubber anti vibration pad

A custom rubber anti vibration pad should fit the area through which the equipment loads its support. The footprint and thickness need to suit the mating surfaces and available space, while the finished compound is chosen for the mechanical and environmental conditions. A broad pad is useful only where its working area is properly supported.

Check the assembled equipment at rest and in operation. The pad should not bridge an uneven gap or allow an edge to move into adjacent hardware. Review any rigid contact beside it that can change the intended support arrangement.

Evaluate vibration behavior on the complete equipment rather than selecting by softness alone. During maintenance, inspect for persistent compression, cuts and displacement at the edges. Clean the contacting faces before fitting a replacement. If the equipment repeatedly shifts or loads one side, review its support and alignment before adding pad layers or increasing thickness. Replacement should preserve the intended working position as well as the nominal footprint of the rubber.

Material options

Rubber. Custom formulation and color for the intended contact conditions.

Hardness selection

Rubber: 30–90 Shore A. If the equipment repeatedly shifts or loads one side, review its support and alignment before adding pad layers or increasing thickness.

Custom dimensions

The footprint and thickness need to suit the mating surfaces and available space, while the finished compound is chosen for the mechanical and environmental conditions.

Fit & assembly

A custom rubber anti vibration pad should fit the area through which the equipment loads its support.

Use & inspection

During maintenance, inspect for persistent compression, cuts and displacement at the edges.

Photos illustrate structure or material only. The pad should not bridge an uneven gap or allow an edge to move into adjacent hardware. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.