Rubber Foot Caps 2″ Silicone Rubber Chair Tips

Silicone rubber chair tips provide a soft interface beneath chair legs, helping cover the hard leg ends that would otherwise touch the floor directly. For a nominal two-inch selection, establish which dimension the size describes before comparing it with the furniture. The outside width of a tip and the opening that receives the leg are different measurements.

Measure the actual end of the chair leg, including its corner radius or taper. A square tube and a round tube with the same overall width need different internal profiles. The insertion depth should also let the leg rest properly against the base rather than hanging from the cover's upper rim.

Once fitted, place the chair on a level surface and check that all tips make stable contact. Avoid stretching a poorly matched opening over sharp corners, which can create a tear during installation. Remove grit from the underside as part of floor cleaning, and lift the chair if a tip starts rolling or coming loose during movement.

Material options

Custom silicone or rubber formulation, with dimensions and color adapted to the mating component.

Hardness range

Silicone: 20–80 Shore A; rubber: 30–90 Shore A. Assess the grade against this fit requirement: Avoid stretching a poorly matched opening over sharp corners, which can create a tear during installation.

Custom profile & fit

Measure the actual end of the chair leg, including its corner radius or taper.

Assembly considerations

Place the chair on a level surface and check that all tips make stable contact.

Design check

For a nominal two-inch selection, establish which dimension the size describes before comparing it with the furniture.

Photos illustrate structure or material only. The outside width of a tip and the opening that receives the leg are different measurements. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.