Rubber Grommet Seal EPDM Rubber Wire Grommet

An EPDM rubber wire grommet forms a compliant interface at a panel passage. It can protect the cable jacket from the cut edge, while any sealing function depends on the contact around both the panel and the cable. A part that seats securely in the hole may still leave an open path around a loosely fitted wire.

Match the retaining groove to the panel and the central passage to the intended cable arrangement. EPDM selection should reflect the actual exposure rather than an assumption that the material suits every fluid or environment. If the enclosure requires a defined sealing level, evaluate the complete entry in that configuration.

Install into a smooth opening and check the flange from both sides where accessible. Avoid routing the cable so its bend continually pulls one side of the grommet away from the panel. Inspect the cable entry during maintenance for a displaced lip, trapped particles or jacket wear. Correct the route or fit if repeated movement prevents the rubber from staying in its intended position.

Material options

Custom EPDM formulation; tailor the geometry and color to the required interface and exposure.

Hardness range

30–90 Shore A for rubber. Assess the grade against this fit requirement: Avoid routing the cable so its bend continually pulls one side of the grommet away from the panel.

Custom profile & fit

Match the retaining groove to the panel and the central passage to the intended cable arrangement.

Assembly considerations

Correct the route or fit if repeated movement prevents the rubber from staying in its intended position.

Design check

Inspect the cable entry during maintenance for a displaced lip, trapped particles or jacket wear.

Photos illustrate structure or material only. Correct the route or fit if repeated movement prevents the rubber from staying in its intended position. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.