Silicone rubber pads/ adhesive anti-slip custom pad

Silicone rubber pads provide a custom flexible contact surface, with an adhesive option for fixing the pad to another part. The pad outline and the adhesive footprint should both suit the mounting area. A suitable rubber face cannot compensate for a bond placed partly over an edge, recess or contaminated surface.

Establish the final location before exposing the adhesive. Check clearances to screws, openings and removable panels, and make sure the contact area will sit where the supported item actually bears. The selected backing needs to suit the substrate and the environment in which it will remain attached. Size, material and color can be tailored to that arrangement.

Prepare the mounting surface using a method compatible with its finish and the chosen adhesive. Position the pad without stretching it, then apply the appropriate seating pressure for the backing. Avoid repeatedly lifting and repositioning the same adhesive face while trying to find the correct location.

Evaluate the assembled item on the intended contact surface, including ordinary sideways movement. Inspect separately for slipping at the rubber face and lifting at the adhesive edge, because these are different interfaces. During cleaning, keep hard debris from embedding in the pad. If a bond has peeled or collected contamination, restore the mounting area and replace the affected pad rather than pressing the exposed adhesive back into service.

Material options

Silicone. Custom formulation and color for the intended contact conditions.

Hardness selection

Silicone: 20–80 Shore A. Position the pad without stretching it, then apply the appropriate seating pressure for the backing.

Custom dimensions

Check clearances to screws, openings and removable panels, and make sure the contact area will sit where the supported item actually bears.

Fit & assembly

Evaluate the assembled item on the intended contact surface, including ordinary sideways movement.

Use & inspection

If a bond has peeled or collected contamination, restore the mounting area and replace the affected pad rather than pressing the exposed adhesive back into service.

Photos illustrate structure or material only. Silicone rubber pads provide a custom flexible contact surface, with an adhesive option for fixing the pad to another part. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.