High quality small silicone rubber tips for chair leg

Silicone rubber tips for chair leg protection should stay seated when the chair is moved in its normal manner. Their compact form needs enough receiving depth to hold the leg without leaving a loose rim that rolls downward. A visually neat fit is not sufficient if the tip creeps away from the leg during use.

Check the leg profile across the area that enters the tip, including any widening above the end. The base should support the intended contact rather than fold to one side under an angled leg. The chosen silicone formulation should be assessed on the actual floor finish.

After fitting, reposition the chair normally and inspect the tips for movement. Repeated slipping is a reason to review the receiving dimensions instead of repeatedly pushing the same loose cover back on. During cleaning, check both the underside and rim for damage. Replace a tip before the leg becomes exposed, keeping the installed height compatible with the other feet so the chair remains stable.

Material options

Custom silicone or rubber formulation, with dimensions and color adapted to the mating component.

Hardness range

Silicone: 20–80 Shore A; rubber: 30–90 Shore A. Assess the grade against this fit requirement: The base should support the intended contact rather than fold to one side under an angled leg.

Custom profile & fit

Check the leg profile across the area that enters the tip, including any widening above the end.

Assembly considerations

A visually neat fit is not sufficient if the tip creeps away from the leg during use.

Design check

The chosen silicone formulation should be assessed on the actual floor finish.

Photos illustrate structure or material only. The base should support the intended contact rather than fold to one side under an angled leg. ETOL directly manufactures custom-shaped silicone and rubber parts to your requirements.